How to maintain the LED automotive light

What the acronym of the LED in English is Light Emitting Diode, as early as the 1960s, it has already started to been produced and has been widely used in household products in 1980, such as audio volume indicator, switch instructions. In the 1990s, the LED has been used in some of the new domestic automobile instrument, mainly used for charging instructions, and later also shows engine speed conditions, such as a combination of instruments produced in Xiangfan Hubei China, a row of LED were erected next to the odometer, When the driver stepped on the gas，the LED bar lights were bottom-up lit, when off the accelerator，LED bar lights bottom-up go out, quite eye-catching and beautiful. In 1990s, China used LED brake light to install in the car, the LED lights up quickly, so that the driver trailing the behind car know what the condition in front of the vehicle to reduce rear-end collision accidents as early as possible.

The Category of LED auto-lights: mainly divided into external and internal lighting fixtures. Common lamps are: headlight, turn signals, taillights, fog lights, rear lamps and so on. The following describes what’s the main maintenance and use of the light.

Lighting repair

In general, as long as not bright, it shows that the lamp has been burned, which must be replaced. But if not completely broken, but decrease in brightness, the lighting is redness and dim, it must not be taken lightly, because this could be a precursor to failure, the ability of the lighting that has been reduced also major risks of the drive safely.

There are several reasons for the decrease brightness, the most common is that there is a plot of dirt on astigmatism lamp glass or the mirror, then what need to do is that use cloth or lens paper to clean the dirt. Another reason is that the capacity of battery charge is decreased, electricity shortages lead to that the bright isn’t enough, so the batteries need to be replaced. Another possibility is that the lines has aged or wires is too small, resulting in that the resistance is increased and thus affect the power supply, this situation affects not only the bulbs work, serious that even lead a fire.

【Maintenance】 various lights

Headlamp:

Generally speaking, the friend who often burn the midnight oil should consider replacing one pair of headlights whose brightness is higher, so that the enough bright help you see all the details on the road and allows you to see farther when it comes to playing away at the dark night. If conditions permit, you can even replace one pair of LED headlamps, which not only ensure the bright, long life, but also has a feature: Color temperature is very high, the color temperature that is close to daylight is kind of protection on the driver's eyes.

Taillights:

Do not underestimate the taillights, if the taillights is broken, which can easily lead to rear-end accidents. Generally speaking, if not failure, n addition to the installation of the transparent lamp to increase the ornamental, replacing the bulbs with the led light is a good choice, led not only increase the brightness, response time has been shortened over that of the traditional light bulb, which means that when you depress the brake pedal, led brake lights can be much earlier lighted up than ordinary light bulbs, so that the trailing vehicle have more preparation time.

Fog light:

Fog light is often said as the spotlights. As the name implies, the main purpose of the fog light is to ensure the driver's view in bad weather, and to ensure that others can see you, but now for many companies, the purpose of installing fog lights is just to make the front bumper more beautiful, so the quality of the Fog light chosen is relatively poor. As the same as the headlamp, beside replace the fog lights whose bright is enough, choosing a hid xenon fog lamps are also a good choice.

Rear lamps:

Reversing is really a headache at night, especially the drivers whose eyesight is not good, there is actually not much help for the faint light of the original reversing lights. Then you need a reversing lamps, which is a independent lamps that is installed in the rear protection bar or at the bottom, it automatically light up after you hang down the reverse gear, its strong brightness makes you are no longer nervously when reversing at night.

The LED light has been applied to the car，which proves that delicate appearance and practical performance of the LED light has perfectly matched with the world's most hottest vehicle. Indeed，the LED light as the third generation of energy saving lighting, in addition to present the unique design to associates with the car , but also combine with medicine, art, agriculture and many other areas to bring us the extraordinary experience and more convenient. Nowadays，the LED flood light and LED tube light is most widely used as the representatives of the home lighting and decorative lighting in daily life，the LED tube light enjoys a great popularity in our corridor, restaurants, shopping,  galleries, exhibition halls and other indoor environments, the LED flood light is mainly used in city squares, parks, stadiums, the facades of large commercial buildings and hotel, stage, waiting rooms, airports etc. where the higher brightness need lighting is needed to illuminate.Meanwhile，there are a large number of manufacturer engaging in manufacturing and researching the LED light，of which the lead lighting is just one，lead Lighting adopts high brightness SMD as the light source of the LED tube and highly integrated and high brightness COB as the light source of the LED flood light, which fully guaranteed stability and soft light of the LED tube light and octahedron breadth and brightness irradiation range of the LED flood light, while the low voltage constant current driver convert the AC  into DC so that improve energy efficiency of the LED tube light and LED flood light and reduce the waste heat energy and stroboscopic effect exciting the human eye, the most important is that the LED lighting without adding mercury and other heavy metals harmful to our body and pollution the environment, that’s why the LED light is famous for energy-saving and environmental protection ，login www.ledclan.com to learn more features and uses of the LED tube light and surf www.lead-lighting.com to know more awesome LED floodlights and other LED lighting.