How to assembly the LED ceiling light

Tools / materials

Prepared materials:

3pcs LED light source

Two Circlips

A set of Light body shell

An aluminum plate

One Terminal line

Three Lens

Spare Paste

Two Screws

Spare soldering iron

Methods / steps

1.First use a soldering iron to weld light source of the LED ceiling light in the aluminum plate;

2. the re-lay thermal grease behind the aluminum plate of the LED ceiling light and then put it back the shell of the radiating;

3.Terminal line of the LED ceiling light through the bottom of the housing and then use the soldering to weld the terminal lines on the positive and negative of the aluminum plate;

4. fix the lens on the source of the LED ceiling light

5.Then put the cover and tighten the cover and lens;

6. tighten and assemble the outer ring

7. assemble the packed light body and shell together again;

8.Connect the drive，then the LED ceiling light can normally be used

Precautions

Electrical connection voltage is 220v，make sure power off and then received the voltage

When welding there mustn’t direct cold joint on the aluminum plate and lamp beads of the LED ceiling light, nor the cable and aluminum plate;

The impurities should not in the Lamp beads，otherwise affect the appearance;

The screws can not be screwed too tight in case of slide wire;

Don't fall the LED ceiling light

Logining the www.lead-lighting.com for more information about the LED ceiling light and other LED lights

Resource from http://www.lighting-ledlight.com/index.php/how-to-assembly-the-led-ceiling-light/

New energy-saving LED Tunnel lighting market broke out

With China’s highway construction advance from the eastern plains to the western mountains , the tunnel is widely used in construction , but the traditional tunnel lighting consumes huge energy, the use of new LED tunnel lighting to reduce energy consumption become the development trend of tunnel lighting . To this end, the Ministry of Transport to promote LED tunnel lighting system to achieve that the lights turn on and off as the car comes and leaves lights in Yunnan , Hebei, Guangxi and other highways, and having achieved significant energy savings.

Yunnan Bao Ma Daozai highway tunnel, a car is entering the tunnel , the vehicle detectors sensitively detect the car at 200 meters away from the tunnel entrance, the tunnel lighting PLC control system immediately open loop，the energy-saving LED tunnel light lamps lit up , the vehicle smoothly enter and exit the tunnel , after detecting the vehicle has left and finding no vehicles inside the tunnel，another tunnel turn off the lighting control system, avoiding unnecessary energy consumption. Experts said , LED tunnel lighting ahs achieved good energy saving effect , on the one hand due to the high luminous efficiency and low power consumption of the semiconductor light-emitting diode, the brightness of LED tunnel lighting is adjustable, wecan adjust light levels inside the tunnel to meet the lighting needs of drivers , which led the control technology of the tunnel lighting , the energy-saving effect is remarkable.

Yunnan Ma Daozai tunnel implemented the LED lighting technology , supply and distribution system active power filter technology and nighttime vehicle sensor lighting control systems, etc.. Project uses a total of 51.64 kilowatts 858 sets of LED tunnel lighting to replace the original 770 sets of 146.19 kilowatts of high-pressure sodium lighting, effectively reduce energy consumption ; Active filter device reduces equipment damage generated by the instability electricity of the power supply; enabling vehicle sensors lighting control systems at night both ensure the lighting requirements of the passage of the vehicles, but also reduce the void lighting without the vehicle passing, the integrated energy-saving rate is 66% compared with the original HPS program.

It is understood that the existing 1957 HPS have been replaced with LED tunnel lighting  in Qiuwo Liang tunnel , Yin ditch tunnel, Hejiagou tower ditch tunnel No. 2 tower ditch Tunnel in Hebei Chengde expressway , since the project was put into operation The average monthly saving is about 45,000 degrees , the annual saving is 540,000 degrees .

Currently, LED tunnel lighting and the control technology based on real-time traffic has been applied in Anhui Lv’an to Wuhan Expressway , Beijing-Taipei Expressway and Shanghai-Chengdu Expressway and many tunnels, which can save 40% to 80% electricity.

Browsing http://www.lead-lighting.com for learn more practical character and features about the LED tunnel light and other LED lighting.

Article from http://www.lighting-ledlight.com/index.php/new-energy-saving-led-tunnel-lighting-market-broke-out/

LED lighting equipped with the new driverless subway trains will enter London

The world ‘s oldest underground railway maybe introduce more spacious , more energy efficient driverless trains in London. New air-conditioning system will make British people without sweating in the summer when taking the subway in future in the coach . The new coach  will display in London Royal Victoria Dock on Tuesday 8th October 2013 .

This coach  is designed by the German electronics company Siemens , using the LED lights as the illumination , allegedly the energy efficient is three times more than the existing，the new coach will not separated by the compartment any more, the weight is two percent lighter, so that the space available increase three percent. The door of the new coach wider than at present , so without force crowded at rush hours .

LED lighting equipped with the new driverless subway trains will enter London

LED lighting equipped with the new driverless subway trains will enter London

LED lighting  equipped with the new driverless subway trains will enter London

Each coach  of the new trains cost more than $ 1,540,000 , Siemens means if the authorities decide to purchase , the train can be manufactured in the UK . However, due to the driverless operate of the new trains, making the minority of subway without a job at any time , the new trains are not expected to welcomed by the relevant trade unions .

The LED light applied to the subway lighting has not only been very popular in UK， but also in the major city of China such as Guangzhou, Shenzhen, Beijing and other countries especially the USA、Japan have also been actively promoting and replacing with the LED light  in the subway over the world.

Apparently, the LED light due to the low-carbon and environmental protection features have been attached great importance by the government departments and applied to the public device.Nowadays，the LED flood light and LED tube light are most widely used as the representatives of the public lighting in daily life，the LED tube light enjoys a great popularity in our corridor, restaurants, shopping, leisure and entertainment, galleries, exhibition halls and other indoor environments everywhere, the LED flood light is mainly used in city squares, parks, stadiums, the facades of large commercial buildings and hotel, stage, waiting rooms, airports etc. where  the higher brightness lighting id needed to illuminate, Lead Lighting adopts high brightness SMD as the light source of the LED tube and highly integrated and high brightness COB as the light source of the LED flood light, which fully guaranteed stability and soft light of the LED tube light and octahedron breadth and brightness irradiation range of the LED flood light, while the low voltage constant current driver of the LED flood light and LED tube convert the alternating current into the direct current so that   significantly improve the energy efficiency and the waste heat energy and stroboscopic effect exciting the human eye, the most important is that the LED lighting without adding mercury and other heavy metals harmful to our body and pollution the environment, that’s why the LED light is famous for energy-saving and environmental protection ，login http://www.lead-lighting.com to know more awesome LED floodlights and other LED lighting.

Article from http://www.lighting-ledlight.com/index.php/led-lighting-equipped-with-the-new-driverless-subway-trains-will-enter-london/

Why do the LED light especially LED tube light improve myopia and lighting

The latest data show that the juvenile myopia is up to 80% in our nearly 400 million persons with myopia , Chinese myopia of the young students, children has been ranked second in the world . Experts believe that environmental factors is fairly close to the incidence of myopia , in which the classroom lighting is one of the most important factors . Yan Yonghong，Professor of College of Architecture and Urban Planning in Chongqing University and the Director of National Low Carbon Lighting Research architectural lighting, said the research proved that  spectra of the LED particularly the LED tube light is easier to meet safety requirements by comparison with the fluorescent lamps, LED has better visual effect performance in the same color temperature and under the same illumination, which is more conducive to student visual health and relieve students’ tension and improve learning efficiency. In the National Natural Science Foundation project ” research health illumination based on the biological effects of light in the classroom ” Professor Yan Yonghong is responsible for, the human’s mentality and physiological responses were tested and studied under different illumination, in which the light and learning efficiency and visual fatigue, mental fatigue experiments show that the value of the recognition curve of  the white color temperature that is about 4000 ° K light source is of best stability and the highest recognition rate . According to the briefing , LED lights especially LED tube light have a greater advantage over fluorescent , which has a very large market potential. Why the LED tube light has not yet formally entered the field of classroom lighting is because that the price of LED light is too high that our majority of us can’t accept, which forms a bottleneck to promote the LED light . Even if the public has learned about the environmentally friendly, energy-saving advantages of LED lights, but the price and quality issues make us stay away, leaving some potential consumers are lack of confidence on LED products .

Recently, the technical team of Shenzhen lead lighting has achieved revolutionary innovation in the electrical, optical, thermal , materials through years of continuous efforts and the integration of advanced technology advantages and solve the universal application puzzle of the LED lighting , greatly reducing the cost of LED products and marketing a highly cost-effective products such as the LED flood light，LED tube light ，LED ceiling light and other pretty LED lighting, which has won wide public acclaim. Lead Lighting is one of the batch of high-tech enterprises first opening up LED lighting field， and thus has a special feeling on the LED industry. At the beginning, the LED industry came step by step at home and abroad , with the growth , development, and it seems that the company is the industry ‘s eldest son , who shouldering more responsibility on the industry , we hope their hard work which are better than more of others in exchange for better and faster development of the domestic LED industry, the product of Lead lighting all through the authority of the department of qualified, certified by CE and ROHS and other certifications. Lead lighting whose website is http://www.lead-lighting.com has been considering the technological innovation as the driving force , painstaking research and development of new products is to specialize the affordable and qualify LED lighting to furthersatisfy the needs of our daily lighting   ,

Article from http://www.lighting-ledlight.com/index.php/why-do-the-led-light-especially-led-tube-light-improve-myopia-and-lighting/

How to design the LED tunnel lighting

The positive volt ampere characteristic of the LED is similar to the general diode， the applied forward voltage slightly change, the forward current will produce great changes , resulting in that the internal loss and fever of the LED rapidly increase，which seriously affect the normal work and life of the LED. constant current power supply must generally be used for high power LED tunnel light to prevent this from happening. To maximize the efficiency of the current source and reduce the heat , the input voltage of the current source must be reasonably controlled so that the maximum value is the same with the current after being deducted the internal voltage and match the total voltage the LED tunnel lighting needs. Internal losses is small, the reliability of the current source can be guaranteed .

The tunnel lighting Generally requires a large number of fixtures , huge power is consumed，the driver of the LED tunnel lights also requires that its power factor and harmonics generated must meet the requirements of the relevant standards in order to save energy and reduce the grid "pollution ", with due consideration of electromagnetic interference and electromagnetic compatibility .

( 1 ) adopt the power that is of high conversion efficiency, high stability  the conversion efficiency is greater than 87% , the power factor is greater than 95% , the switching power supply (96 ~ 264V) that strongly against the external voltage fluctuations together with the constant current circuit design，driving the LED tunnel light source at constant current is to ensure the life of LED tunnel lighting.

( 2 ) using the control circuit which appropriate the tunnel lighting, regulating the power of the LED tunnel lighting at different tunnel segments and different time is to achieve good lighting effect and energy saving. The introduction of the tunnel inlet section , using different current to drive at the Adaptation stage, transitional stage and outlet sections and trying best to make it is close to the curve required of the tunnel lighting to achieve the best lighting effects ; adopting the timing adjustment function at tunnel inlet section and an outlet section， by adjusting the output current PWM dimming or dual power supply , single supply at night , so that the power of the LED tunnel light is reduced to 50% of the daytime lighting , which are effective to reduce "light hole" and "black hole "phenomenon both during the day and night .

Browsing www.lead-lighting.com for more information about the LED tunnel lighting and other LED light

Resource from http://www.lighting-ledlight.com/index.php/how-to-design-the-led-tunnel-lighting/

How to detect the power supply of the LED flood light and other LED lights

1 , By observing the shape of the transformer is to check whether there are significant anomalies. If the coil wire is broken , Desoldering, there are burn marks or not for the insulation material, whether the core fastening screw of the LED flood light loose and the silicon steel rust and the windings expose and so on.

2, the insulation test . Use a multimeter R × 10k to respectively measure the core and primary of the LED flood light, primary and the secondary , core and the secondary, electrostatic shielding layer and panties secondary , secondary resistance value between the windings . Multimeter pointer refers to the infinity position which should not move , otherwise , indicating poor performance of transformer insulation of the LED flood light.

3 , the detection coil is off . Place the multimeter R × 1, if a winding resistance is infinite , then there is open circuit failures of this winding.

4 , determine primary and secondary windings. The primary pin and secondary pin of the Power transformer are respectively generally drawn from both sides and the primary winding mostly is marked with 220V and the secondary winding is marked with rated voltage , such as 15V, 24V, 35V , etc. , according to these marked for identification.

5 , no-load current detection .

Direct measurement. open all the secondary winding and put the multimeter in AC current 500mA, string into the primary winding . When the primary winding of the plug into 220V AC power , what the multimeter indicate is the load current value. This value should not exceed the 10 % -20% of the full load current of the transformer. The normal load current of the power transformer of general common electronic equipment should be about 100mA . If out too much, then the transformer of the LED flood light short-circuit .

Indirect measurement. Series with a 10/5W resistor in the primary winding of the transformer，the secondary still full load. Dial the multimeter to the AC voltage . After power，use the two probe to measure the voltage drop R U across the resistor, then use Ohm’s law to calculate the load current -I empty, that I empty = U / RF.

6 , temperature testing. The allowable temperature rise of the small power transformers is generally 400C ~ 500C, if the insulating material is of good quality , but the allowable temperature also can be improved.

7 , detect and discriminant dot end of each winding . When using AC adapter of the LED flood light, sometimes two or more secondary windings can be in series to use in order to obtain the required secondary voltage. Adopt the series method to use the power transformer , the same name ends of the each winding participating in series must be properly connected , which should not go wrong, otherwise , the transformer is not working properly .

8 , comprehensive detection and discriminant of the short circuit fault of the power transformer of the LED flood light. the main symptoms of the short circuit of the Power transformer are fever and serious disorders of the output voltage of the secondary winding . There are usually more points of the short circuit inside the coil inter-turn， the greater the short-circuit current，the more seriously the transformer fever. The simple method of testing determining whether the circuit of the Power transformer is short is to measure the load current of the LED flood light. For the transformer existing the short-circuit fault , the no-load current value will be greater than 10% of full load current . When the short circuit is severe, the transformer will rapidly heat after no-load power for tens of seconds, there is a hot feeling when touching the core. At this point，we can judge that there is short circuit for the transformer of the LED flood light without measuring the load current.

Browsing http://www.lead-lighting.com for more information about the LED flood light and other LED lighting.

Resource from http://www.lighting-ledlight.com/index.php/how-to-detect-the-power-supply-of-the-led-flood-light-and-other-led-lights/

Why choose the LED tube light for office lighting

The general public places includes the offices, office buildings, commercial centers. Because the office space require office staff to keep the mind fresh, comfortable and peace of mind for long time so that work efficiently without feeling tired. Then the office lighting should create a good working environment, office lighting are usually based on the functional needs in the office, while taking pretty advantage of natural light, combining with artificial lighting in order to maintain stability, reasonable, comfortable , healthy light environment. The artificial lighting is necessary to meet the illumination requirements, but also the illumination is uniform ; reducing the strobe effects of glare lighting to reduce visual fatigue of the office staff . So cool light color should be used , the color temperature is better between 4200 ~ 5300K, which is closer to the morning light in order to remain calm and clear mind . Ceiling mounted LED tube light can be used , LED downlight, LED ceiling light for corridors or auxiliary lighting, the fluorescent ceiling metal reflector can also be used , the embedded aluminum reflector grille fluorescent with ceiling is often installed in the offices .

Office lighting requirements :

1 , select the appropriate color temperature and color rendering index, > 4000K color temperature is generally selected in the workplace, color rendering index is Ra ≥ 75.

2 lighting levels : different environments, different places have different requirements for lighting . Workplace illumination shall meet the requirements , usually 500-1000lx.

3, the illumination uniformity: reasonably arrange lamps so that the illumination is uniform and the office is maximum, the gap between the minimum and average illuminance is less than the 1/3 of average intensity.

4 , comfort and glare control : the ratio of the high brightness or luminance is too large in the field of vision , it will make people feel dazzling glare . Measures to prevent glare light is mainly limited intensity , rational arrangement of the light source . If the light source is at more than 45 degrees of the sight to form a shielding angle or opaque material blocking light.

5 , security: the safety of the lamps structure is mainly considered, electrical safety, whether the lighting meets national standards and pass the 3C certification.

6 , energy saving and environmental protection: selection of high luminous efficiency light source, high efficiency, long life , reasonable light fixtures , high-performance , long-life accessories. Generally choose batwing light distribution with light , the light intensity can be uniform and widely distribute. Based on the above office requirements, LED tube light is recommend as the main office lighting.

The dimensions of the caliber of the LED tube light is the same as that of  the traditional fluorescent lamp , the length is 600mm, 900mm and 1200mm, 1500mm, the power is 9W, 14W, 18W and 25W, and actual power consumption of 20W traditional fluorescent is approximately 53W , actual power consumption of 40W traditional fluorescent is about 68W; 9W LED tube is brighter than fluorescent light 18W , 18W LED tube is even brighter than traditional 40W fluorescent lamp , LED tube light is soft and comfortable to make people more receptive to . the Life span of the LED tube is 20,000 -30,000 hours electricity ，the supply voltage is AC85V-260V ( AC ) , without starter and ballast, quick start , low power, no flash, not easy visual fatigue. It is not only more environmentally friendly but energy superpower . LED tube is the main product replacing the traditional fluorescent lamp.

Browsing http://www.lead-lighting.com for more vivid and prettier LED tube and other LED lights.

Article from http://www.lighting-ledlight.com/index.php/why-choose-the-led-tube-light-for-office-lighting/

What must be taken care when designing the LED ceiling light

First of all , the LED ceiling light is generally installed where the air convection conditions are good in order to achieve sufficient cooling effect, keep the housing of the radiator unobstructed so that the heat timely spread out through the housing .

Second, the metal shell and the power line and the shell of the LED ceiling light should be connected to ground (FG)，the reliable grounding is to ensure safety , do not mistakenly connected the shell to the zero line.

Third, please check on each terminal connection of the LED ceiling light again before running, don’t energize the LED ceiling light until make sure the input and output , AC and DC , single phase and multiphase , positive and negative , the voltage and current values are ​​undoubtedly correct.

Fourth, the Department of leakage current: when multiple power supplies are used, all of which intake the same ground , the total leakage current is composed by the sum of the leakage current of each unit, then to check the reliability of protective grounded line and whether the grounded resistance achieve requirements，in case of being electrical shock .

Five , for the switching power supply of high-power LED ceiling light and LED Downlight, there are generally two or above the ” +” input terminal and ” – ” output terminal , in fact they belong to an output electrode , just to allow users easy wiring and the plurality of terminals are connected internally.

Six , for symmetry with dual output load , the preferred symmetrical output power .

Seven , LED switching power supply add the resistive load previously factory , for use in capacitive or inductive the load，which should be described in the order in advance.

Eight , the defined input power of AC input power = output power / ( input voltage * power factor * efficiency )

Above all , for the users whose FG is not grounded, the hemp feeling is normal when touch housing or output power of the LED ceiling light , there is 110V AC output when the FG floating around the earth, which is determined by the internal structure of the power of the LED ceiling light.

Just browsing http://www.lead-lighting.com for more practical use and characters of the LED ceiling lights and other LED light

Resource from http://www.lighting-ledlight.com/index.php/what-must-be-taken-care-when-designing-the-led-ceiling-light/

Incredible ! Satechi ” turning waste into treasure,” bottle-shaped LED table lamp

Believe it ? Almost all of the empty bottle can become a lamp, just putting the Satechi touching USB LED bulbs. We don’t have to throw bottles any more , simply putting bulb into the bottleneck and inserting into the USB port , touching the top of the silver part of the bulb，an environmentally friendly desk lamp instantaneous.

Satechi Touching USB LED Light is not only “turning waste into treasure,” the secondary use of waste bottles , and the LED does not contain mercury , the battery life is up to 50,000 hours . We are no longer need to landfill waste incandescent or fluorescent lights that leak the toxic mercury into drinking water sources. The lamp consumes only 1.2 watts, compared to incandescent and fluorescent lamps, its energy consumption is very small , it is the best choice for environmental protection .

White matte shade diffuse light , producing a soft light, creating a comfortable environment , which is an ideal lamp bedside the bed or on the desk . Simply touch the top of the silver disc of the bulb, we can freely turn on and off the lights . As light weight , keeping at a lower temperature in order to touch , so it can be easily moved to any place we need .

Simple design and white bulbs can be integrated into any decor , in particular, we can use our own bottle to custom lamp base . Selecting or replacing the bottle according to the mood or new furniture, which  display bottles or embody our favorite retro style from a special angle , rather than throw it away . In the case of no flowers in a vase , Satechi touching USBLED lights can put itself into a lamp . If  we do not know what others decorative style , perhaps this would be a perfect gift.

Using a damp cloth to clean the Satechi Touching USB LED Light , it is not waterproof , so it can not be placed in water and moist environments . Before cleaning, unplug the lamp to avoid electric shock.

There is no doubt that LED lighting has been pretty related to the electronic and design to offer us the significant convince , LED lighting as the third generation of the lighting based on the semiconductors isn’t limited to simple lighting any more, it is connecting to the design, agriculture, medicine, science and technology and other industry to show us unique visual experience and convenience.

Nowadays，the LED flood lights and LED tube light are the most widely used as the representatives of the decorative lighting and the home lighting in daily life，the LED tube light enjoys a great popularity in our corridor, restaurants, shopping, leisure and entertainment, galleries, exhibition halls and other indoor environments everywhere, the LED flood lights is mainly used in city squares, parks, stadiums, the facades of large commercial buildings and hotel, stage, waiting rooms, airports etc. where the higher brightness is needed to illuminate,meanwhile，there a large number of factory engaging in developing and producing the LED light，Lead Lighting is just one of them，which adopts high brightness SMD as the light source of the LED tube and highly integrated and high brightness COB as the light source of the LED flood lights so that fully guaranteed stable and soft light of the LED tube light and octahedron breadth and brightness irradiation range of the LED flood lights, while low voltage constant current driver ensure the AC can be converted into the DC to improve energy efficiency of the LED tube light and LED flood lights and reduce the waste heat energy and stroboscopic effect exciting the human eye, the most important is that the LED lighting without adding mercury and other heavy metals harmful to our body and pollution the environment, that’s why the LED light is Known as energy-saving and environmental protection. Browsing http://www.lead-lighting.com  to know more awesome LED flood lights and other LED lighting.

Article from http://www.lighting-ledlight.com/index.php/incredible-satechi-turning-waste-into-treasure-bottle-shaped-led-table-lamp/

How to design the hotel lighting

First , by virtue of the innovative technology and design concept. In recent years, the LED light especially the LED ceiling light and LED tube light and other interior decorated lighting relatively fast developing is one kind of innovative technology that can be more understood and utilized. In addition, for the interior designers, the more efficient design concept is need for the requirements of designing lighting, positioning for different space. There are roughly five factors summed up: vertical illumination such as the LED ceiling light and LED tube lightand other interior decorated lighting, high-quality lighting technology , high-speed lighting technology , intelligent lighting controls and efficient lighting . Here, what have to say is the LED light, as new technology, new light, LED lighting is growing at a tremendous potential to enter and occupy a considerable part of the market and has become the revolutionary force of the entire lighting industry, which brought new changes for the lighting industry.

Second , properly handle the working relationship between the lighting design and interior design. There will be lighting consultants involved to design certain stage , at this stage , it mainly based on the communication and understanding of the lighting designers and interior designers . And the lighting design consultants won’t be fully involved in reading the drawings and designing the lighting such as the LED ceiling light and LED tube light and other interior decorated lighting until the interior design stage is completed . The lighting consultants provide some lighting solutions according to the features of the space designed，which is a very crucial aspect , and why many lighting designers use 80 % of the time to understand the design of architectural and the interior designers and the other 20% of the time used for designing the lighting, only clearing what the ideas is the designer wants to express is to better carry out lighting design and lighting choice for lighting and debug so that achieve a more harmonious whole interior effect . It is done in the process of designing and not just repaired after the design is complete.

People for the visual and sensory stimulation is always direct and pure . While the good lighting design particularly the LED ceiling light and LED tube light and other interior decorated lighting provides convenience for our living, we feel more relaxed and pleasant. According to the lighting elements for good lighting , three parts interpretation can be divided into

First, there is the visual environment where we are , which need a certain brightness. Low luminance relax us, but too dark will make us panic . Second, the visual comfort. It is light era, not illuminate era. Different groups of people have different visual comfort expectations and requirements, the illuminating is not fully meet our demands . Good lighting have made ​​requests on the how to control the glare and light color. Third, the visual effects., the ratio of the light irradiation direction and illuminance always different at different space, the three-dimensional layering demonstrated will not the same, the difference of this effect is the pros and cons of lighting quality .

If we say that an interior designer is a director, then the lamp is the actor , what the film’s theme and nature is how to behave a movie for the actor , all of which need to be debugged by the director. What the designers have to do is how to schedule their resources to achieve the film’s value, which is a tedious process , but also the designer must be aware of . You know, in addition to the design , we should also take into account the activities of an atmosphere of the space and security ,the knowledge of the building mechanical engineering, the future energy consumption , cleaning, the convenience of replacement of the light source and other factors. Apparently，because of the unique design and features of energy saving and environmental protection，the LED panel light and LED tube light and other interior Lighting are the ideal design in a hotel , but not an isolated one . A lighting design program used is the need to sign a contract with the owners , if without the good grasp of economic factors , the program will not certainly be implemented . So for designing the hotel, the designer’s understanding need to reflect the use of refinement to the people . Learning the Lighting is a kind of biological effects , designing the lighting is to arouse our feelings and reflection , followed by polish the architectural and natural space .

In addition, for the domestic designers, the illumination , color temperature , color richness, different themes, different personalities , etc., which are a part of interior design are also supposed to be focused in the process of designing, there is no doubt that the LED ceiling lighting and LED tube light other interior decorated lighting is currently the most suitable lighting to achieve better environmental indoor lighting and better position to achieve the elegant and generous features of the hotel.

Browsing http://www.lead-lighting.com for more vivid and specialize LED lighting such as the LED tube and LED ceiling light.

Resource from http://www.lighting-ledlight.com/index.php/how-to-design-the-hotel-lighting/

What's the main features of the interior hotel lighting

From the perspective of lighting designers , the real lighting performance depends on what the designer has done . In view of the design concept , the lighting especially the LED ceiling light and LED panel light and other decorative LED light can enhance the effect of interior building space , which is beyond doubt.

Lighting design standards

Lighting is an extremely important factor in the hotel , to a certain extent that how to locate the hotel can reflect from the design effect of the light.

Considering the area , the lighting includes the external lighting and interior lighting，in which the internal lighting is mainly related to public areas , which include the hall, meeting rooms, the ballroom, and all other customer activity area . This is a very wide range , and therefore, international brand hotels are more stringent and meticulous for lighting design standards , different regions have different requirements , and these requirements affect the design effect of the LED ceiling light and LED tube light and other LED lights.

As far as the parameters is concerned , the illumination , dimming resistance, brightness and color temperature is the lighting design standards that can not be ignored.

Illumination: different rooms, and even rooms in different areas , which are different requirements on the illumination

Dimming : Most of the International rooms are dimmable, this is more detailed sections containing in the hotel design: the general lighting and decorative lighting equipment can freely adjust the brightness within the 0-300LUX by virtue of the dimming control panel .

Brightness: the brightness we talk can be adjusted , but the brightness of a region mostly remain within a certain range. If the hall is generally 300LUX, the brightness of the front Desk is 500LUX, the general lighting such as the LED ceiling light and LED tube light is 200LUX for the rooms.

Color temperature: for the hotel, the lamps that is of the 3000K color temperature or more used are very few . Of course, the color temperature is changeable , for the luminary whose color temperature is the same, on the basis of dimming， when it is dim，the color temperature is also reduced. Therefore, some hotels choose the LED ceiling light and LED tube or other Interior decorative LED lighting products whose color temperature has been debugged. Of course, in addition to this, the quality of the product is very focused by a lot of brand management company . In the light of the criteria, the designer should be familiar with the different regions to understand the product requirements .

The analysis of visual effects of the Efficient lighting design

From the perspective of lighting designers , either in view of the environmental, or in terms of the actual lighting effects , minimize the use of lighting systems and lighting is very necessary , which is also a problem a lot of designers are now facing and has also become an important disparity between the performance factor the design team at some point.

The combination of natural light and artificial light and designing at different times in different regions is to achieve such a goal so that it is the least possible to use the artificial light. What the designers to do that the lights such as the LED spotlight and LED ceiling light or LED panel light should not just be decorated on the wall, but also specifically for the design of what theme you want to express, how to more efficiently express this theme.

For example, the theme of the hotel we want to express is a very elegant streamers , we do not need to be lit up all regions , but rather with the help of the column is to reveal the pattern. And for some scenes , which is the things certain areas highlighted is to show.

Overall, the effect of indoor lighting manifestations are varied and changing , the visual effects of interior design we pursue is also increasingly efficient. This is an evolving process , we requires more substantial professionalism to keep up this process and maximize the efficient visual comfort.

We can browse www.lead-lighting.com for more elegant and vivid LED ceiling light and LED panel light and other interior hotel lighting.

Resource from http://www.lighting-ledlight.com/index.php/whats-the-main-features-of-the-interior-hotel-lighting/