As a new generation of energy saving LED tube
light, although it has appeared for only a few years from the earliest to now, the
rapid development witnessed the process of the product constantly improving and innovating.
The first generation LED Tube light
The shell of early (around 2005) led tube light is made of plastic, used F5 straw hat led lamp beads as lamp beads, the fiberglass
board is used as circuit board, power supply is built-in non-isolated power
supply, then the whole effect of light was about 40-60LM / W. But soon
discovered that the fades of the LED tube light was very serious, the life was expectancy
actually only 1000-2000 hours, which was mainly caused by the package structure
of the hat light and the problems of the tube materials，because the radiating of the hat
light mainly rely on two leg，plus Lamp circuit board was the glass plate, all the housing was
plastic, so that the overall thermal performance was poor, when the entire
light was energized， the heat generated was sealed in the tube and could not shed, which
caused the entire lamp was scrapped in a short time, it absolutely made consumers
lost confidence on led tube light..
The second generation LED Tube light
When we discovered that the hat light lamp was
not suitable for use, the most manufacturers began to use SMD as the LED tube
light around 2007,the shell was made of half-half aluminum and plastic, the
aluminum plate started being used for circuit boards, but this was a rather
messy period, the light source used was 3528, 3020,5050, etc., and even 1W high
power led, and because each used a different approach, the whole lighting
effect was 60-80LM / W or so, power internal, external, isolated, non- Isolated
variety of programs co-exist. At this time, the buyer were confused, and the price
of a variety of products was huge different, we did not know how to choose.
Third Generation LED Tube light
Around 2009, as the rapid development of
led, the light efficiency of led lamp beads was rapidly improved, high light
efficiency (100LM / W), good heat dissipation, small volume began to
be designed in 3014 SMD led lamp, the whole
lighting effect was also raised to 70-100lm / W, at this stage because the
effective was good, prices were down a lot, the sales have begun to rise.
Mainstream products were 3528,3014-based on the market at this stage, but there
were still many gaps between the target and the people.
The fourth-generation LED tube light
Around 2011, 3014 SMD began to be made use
of, because the flux of the single led lamp beads was enhanced, the pieces of led
lamp beads used and costs also were reduced, in the case of achieve the same
luminous flux, more importantly, 3014 SMD had better thermal performance, the light
emitting area was larger and the light rate was better etc. ,
it can be concluded that for a long period of time, the use of the core 3014
SMD as the led tube light’s source is bound to become a trend.
Lead Lighting adopts high brightness SMDLED
as the light source, the PC cover has high transmittance, anti-glare, anti-UV,
impact resistance,browse www.ledclan.com for more information about LED tube light.
没有评论:
发表评论